Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Mechanical
> Used
> 3 - airless gun to hose, hose to hose, angle adapter
3 - airless gun to hose, hose to hose, angle adapter
YOU ARE GETTING ALL 3 CONNECTOR: 1 each
1- TITAN 500-428 SWIVEL, GUN TO HOSE CONNECTOR SWIVEL
1/4 (.63 cm) NPS (F) x 1/4 (.63 cm) NPS (M)
Pressure rated at 5000 PSI (34.5 MPa)
Reduce the chance of hose kinks, extend hose life
Reduce effort when coiling & uncoiling hose
Less arm fatigue when attached to gun
Patented ball bearing design
1- TITAN 500-424 SWIVEL, HOSE TO HOSE CONNECTOR
1/4 (.63 cm) NPS(M) x 1/4 (.63 cm) NPS(M)
1- TITAN 310-072-1 Angle Adapter Assembly:
Adapt any extension pole to any standard airless gun. Because of it s right-angle design, the angle adapter allows the pole to extend from the gun at the same angle as the handle. The result is greater efficiency & comfort. Pressure rated at 3600 PSI (257 BAR). Refer to the retaining nut chart on this page to select the proper nut size to adapt to your Airless Gun.
1 Titan, Graco,Wagner, Spray TECH, ASM)
IF YOU ARE INTERESTED IN JUST ONE LET ME KNOW THANKS.
