Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Mechanical
> New
> Parker compumotor stepper motor w/ 3.5A drive cp-e-ac
Parker compumotor stepper motor w/ 3.5A drive cp-e-ac
Parker Compumotor Stepper Motor w/ 3.5A Drive CP-E-AC
* 3-state current control -motor to runs cooler & more efficiently than 2-state drives
* Selectable resolution up to 50,800 steps/rev
* Auto standby reduces motor current (and heating) at rest
* Provides 0.02 Amps to 3.5 Amps (peak)
* 120VAC (95 - 132VAC) power supply input
* Optically isolated step and direction inputs
* Short circuit protection phase-to-phase and phase-to-ground
* Over temperature circuitry protects the drive from thermal damage
* Accuracy 5 arc min (0.0833 ) typical.
* Repeatability 5 arc sec (0.0014 ) typical.
* Waveform Selectable. Allows waveform shaping for optimum smoothness or relative accuracy. Pure sine; -4%, -6%, -8%, 3rd harmonic.
* Type 20 kHz fixed frequency, variable duty cycle pulse width modulated (PWM )
* Current Controlled, bipolar chopper
* Output Current 0.02 3.5 Amps peaks of Sine
* Max Stepping Rate 2 MHz max pulse rate; 50 rps max speed
* Static Torque: 1269.67oz-in. (8.97Nm)
* Rotor Inertia: 14.8oz-in2 (2.7gc-cm2)
* Drive Current peak/RMS: Series 3.13/2.21A; parallel 3.8/2.47A
* Detent Torque: 50oz-in. (0.35Nm)
* Gearbox Torque Rating: 50Nm
