Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Mechanical
> New
> No Warranty
> New 95 ton 9" thrt scotchman do 95/140-24M ironworker,
New 95 ton 9" thrt scotchman do 95/140-24M ironworker,
95 Ton 9" Thrt Scotchman DO 95/140-24M NEW IRONWORKER,
95 Ton 9" Throat Scotchman DO 95/140-24M NEW IRONWORKER, Dual Operator
Dual operator allows for two operators to work at the same time at full capacity.
95-ton punch station (1-3/16" in 1")
Punch gauging table with fence and scale
Die holder complete with 2" die insert
Adjustable swing-away stripper
One round punch & die: max. diameter 1-1/4"
Two adjustable electric stroke controls with scale
Two electric remote foot pedals
Angle shear capacity: 6" x 6" x 1/2" at 90
Rectangle notcher 3" x 4" x 1/2"
140-ton, 24" flat bar shear with sabre blade
Electrical box supplied with emergency palm button and lock-out tag-out accommodations
230/460 volt / 3-ph electrics (must specify voltage)
All guards necessary to comply with ANSI B 11-5 standards
Special Tooling 4" Max. Dia. 100 mm through 5.5 mm
4" x 4" x 1/2" 150 mm x 150 mm x 12 mm
Open End Brake Max. 1/4" x 6" Flat or Angle Iron 6 mm x 150 mm
90 V-Notcher 6" x 6" x 5/16" 150 mm x 150 mm x 8 mm
3" x 4" x 1/2" 75 mm x 125 mm x 10 mm
V-Notch 3" x 3" x 3/8" 75 mm x 75 mm x 10 mm
Notching in Leg of Channel 6" to 10" 150 mm to 250 mm
Channel Shear 2" to 6" adj. 50 mm to 150 mm adj.
Offset Die Holder Max. 40 ton Max. 36 mt
Strokes per minute in light material 1/4" stroke [Punch Station] 25 spm
Strokes per minute in heavy material 3/4" stroke [Punch Station] 17 spm
