Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Industrial
> Used
> Plus Warranty
> Miller millermatic 180 mig w/cart/sg 907312011
Miller millermatic 180 mig w/cart/sg 907312011
MILLER MILLERMATIC 180 MIG w/cart/SG 907312011
PICTURE BELOW: PICTURE OF SPOOLGUN SHOWS THE CASE HAS STORAGE SPACE FOR ONE 1# SPOOL OF ALUMINUM, IT IS NOT INCLUDED WITH THE SPOOLGUN
Millermatic 180 with Auto-Set &
Spoolmate 100 Series Spool Gun
* The most powerful and smoothest starting machine in its class
* 230 VAC, 135 A at 30% duty cycle
* Spool gun INCLUDED - welds aluminum from 18 gauge to 1/4 inch
POWER SOURCE, , ECONOMY CART, 6 FT POWER CORD AND PLUG, 10 FT M-10 MIG GUN AND CABLE ASSEMBLY, 10 FT WORK CABLE AND CLAMP (GROUND), SMITH ARGON AND ARGON/CO2 REGULATOR/FLOWMETER GAUGE WITH HOSE, SPOOL OF HOBART .030 SOLID WIRE, TWO .024 AND TWO .030 CONTACT TIPS, DUAL GROOVE QUICK-CHANGE DRIVE ROLL FOR .024 AND .030/.035 WIRE, FACTORY INSTALLED GAS SOLENOID VALVE, SET-UP AND OPERATION VIDEO AND INFORMATION/SETTINGS CHART
Comes with full 5/3/1 year true blue factory warranty
You can call me at (***)-854-7380 FROM 5:00AM-7:00PM PT, 7 DAYS A WEEK.
CLICK HERE FOR COMPLETE SPEC SHEET:http:// /pdf/spec_sheets/DC12-44.pdf
MILLERMATIC 180 W/ECONOMY CART (907312011)
SUGGEST LIST PRICE $1058.00 +$229.00 FOR SPOOLMATE 100
New! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork!
NEW! MORE OUTPUT. Semiautomatic constant voltage wire welding package is capable of welding 24 gauge up to 5/16" mild steel.
NEW! Smooth start patent pending technology provides a smooth, spatter-free start. It's the best-starting machine in the small mig machine category. No pop gun starts and no spatter to clean up.
Durable cast aluminum feed head incorporates dual-groove quick change drive roll and spring-loaded tension arm with calibrated tension knob all designed to make set up easier and faster.
Miller's exclusive "tip saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
Easy access to output studs provides convenient polarity changeover when changing from solid or flux core wires.
Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
Standard built-in solid -state contactor circuit makes wire electrically "cold" until trigger is pulled, making unit safer. It's also easier to position torch to work before starting weld.
Self-resetting motor protection circuit eliminates the need to find and replace fuses.
Uses 4 or 8 in. spools (2lb and 10/11 lb) and can be set up to weld with wire sizes .024-.035 mild & stainless wire and .030-.045 flux cored wire.
POWER SOURCE, , ECONOMY CART, 6 FT POWER CORD AND PLUG, 10 FT M-10 MIG GUN AND CABLE ASSEMBLY, 10 FT WORK CABLE AND CLAMP (GROUND), SMITH ARGON AND ARGON/CO2 REGULATOR/FLOWMETER GAUGE WITH HOSE, SPOOL OF HOBART .030 SOLID WIRE, TWO .024 AND TWO .030 CONTACT TIPS, DUAL GROOVE QUICK-CHANGE DRIVE ROLL FOR .024 AND .030/.035 WIRE, FACTORY INSTALLED GAS SOLENOID VALVE, SET-UP AND OPERATION VIDEO AND INFORMATION/SETTINGS CHART
087299 .023/025 CONTACT TIPS PKG OF 10
000067 .030 CONTACT TIPS PKG OF 10
000068 .035 CONTACT TIPS PKF OF 10
000069 .045 CONTACT TIPS PKG OF 10
226190 NOZZLE FOR FLUX CORE WIRE
CS15 FLUX CORE WIRE .030 X 10#
NEW SPOOLMATE 100 IS IN STOCK, CANNOT LIST ON INTERNET UNTIL 9/14/07 300371
