Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Industrial
> Used
> Astatic dynamic microphone- model 525 DL6 the raven
Astatic dynamic microphone- model 525 DL6 the raven
Astatic Dynamic Microphone- Model 525 DL6 The Raven NIB
Dynamic Hand Microphone for Mobile or Station use, made by Astatic, rare at best.
This microphone is New in the Box, and has been discontinued years previous.
This microphone was popular in 1988 to 1990's.
The microphone is not a power microphone, but a high quality microphone for communication applications.
This dynamic type microphone work best on radios having input impedances of 100 to 2500 ohms.
It will work on other radios, but the modulation levels will be lower.
The application sheet lists about any CB transceiver and the appropriate wiring diagram designation for correct wiring.
A dynamic mobile communication microphone for CB, Amateur and SSB applications.
The rugged, dependable, dynamic element (the same type element used in professional two-way radios) offers the optimum frequency response, tailored for maximum intelligibility and clarity.
The 5 wire (one conductor shielded) cable allows for virtually any type hook-up with almost any radio.
* The model 525DL-6 has its high output response curve especially shaped to provide maximum intelligibility with clarity of speech and to minimize adjacent channel interference.
* Highly functional and durable in mobile or base station applications.
* Tailored response permits high voice levels with minimum pickup of unwanted noise.
* Very useful as an announcer's microphone at sporting events and picnics.
OUTPUT: -76db (0db = 1 volt per microbar)
FREQUENCY RESPONSE: 100-5000 Hz, tailored for voice range for maximum intelligibility and clarity.
POLAR PATTERN: Semi-directional, noise-reducing.
SWITCH: Push-to-talk DPDT long life, trouble free, smooth operating.
CABLE: Five conductor (one conductor shielded) coiled cord. Durable strain relief protects against cable breakage at microphone housing. Can be wired to any 3, 4, 5, or 6 wire system.
RECOMMENDED LOAD: 100-2500 ohms.
HOUSING: Molded high impact Cycolac.
MOUNTING BRACKET: Design permits mounting on vertical or horizontal surface.
SIZE: 3 3/8" high x 2 3/8" wide x 1 5/16" deep.
