Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Industrial
> Refurbished
> Simadre 520Z 50A plasma cutter 200A tig arc mma welder
Simadre 520Z 50A plasma cutter 200A tig arc mma welder
SIMADRE CT-520Z WELDER with DIGITAL PANEL CONTROL
BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES !
THREE MACHINES INTEGRATED IN ONE - 220V/50A Power Supply - 220V Single Phase
POWERFUL and HIGHLY INTEGRATED TECHNOLOGIES ON ALL KINDS OF METALS including ALUMINUM!!!
THIS SIMADRE ADVANCED 3-IN-1 MACHINE OUPERFORMS OTHERS!!
* Digital Control Panel and Dual LED Digital Displays
* Controlled by singlechip's integrated circuit
* SG-55 High Performance Cutting Torch
* Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.)
* Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm.
* Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span.
* Rated Duty Cycle 90% (Over 95% Duty Cycle) to cut and weld continuously
* Digital Air Pressure Cauge
* Digital Internal Temprature Gaug
* Advanced MOSFET inverter technology with DC output means high cutting and welding performance on most metals inlcuding aluminum.
* The newest semiconductor circuits in this machine are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service
* Electronic conversion function, steady current and centralized arc can work on all kinds of metals
* Plasma Cutter is 3/4" rated with 1" severance cuts
* Tig Welder has a 5/16" weld thickness and a high frequency non-contact start.
* Arc/MMA Welder has a 3/16" weld thickness - 2.5 - 4 Rod
TIG: 30-200 MMA: 30-200 CUT: 35-50
* Ground cable (9 ft) with clamp.
* Initial cutting consumables
* You shall provide 60~70 psi air supply, 110vac or 220vac power plug for plasma cutting
* You shall provide argon tank for tig welding
Please check our warranty policy in section 5.
