Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Industrial
> New
> Plus Warranty
> Kepco ra 19-8B rack hot swap power supply 5-5V 5-12V
Kepco ra 19-8B rack hot swap power supply 5-5V 5-12V
This is a KEPCO RA 19-8B Rack Hot Swap Power Supply, consist of Qty 5- HSF 5-20 Supplies & Qty 5- HSF 12-4.2 Supplies. Unit powers up fine, all the individual units check out fine. Here is some additional on the web about the model, there is a lot of information about this item on the Manufacturers website.
Kepco Series RA 19 Rack Adapters are specifically designed for the installation of Kepco's Series HSF hot swap power supplies into 19-inch EIA standard equipment racks. These racks allow redundancy between power supplies contained within the rack as well between identically populated racks.
* RA 19-(X)B rack adapters accommodate Kepco 3U 50W, 100W, 150W (Series HSF-PFC and Older HSF 50W, 100W, 150W and 350W (Series HSF) power supplies. RA 19-(X)B models are recognized by UL and CSA.
Individual racks may also be connected in parallel for greater output current or series for greater output voltage. Optional brackets are now available to allow RA 19(X)B rack adapters to be installed in 23-inch or 24-inch racks. Other Series RA 19 rack adapters are compatible with standard extenders for 23-inch or 24-inch racks.
There are six standard RA 19-(X)B models
* RA 19-3B for 3U 350W HSF power supplies (1/3 rack)
* RA 19-6B for 3U 150 Watt HSF-PFC (or HSF) power supplies (1/6 rack)
* RA 19-8B for 3U 50 Watt or 100 Watt HSF-PFC (or HSF) power supplies (1/8 rack)
* RA 19-4B for a mix of the 3U 1/3 (two), 1/6 and 1/8 rack sizes
* RA 19-5B for a mix of the 3U 1/3 (one), 1/6 and 1/8 rack sizes
* RA 19-7B for a mix of the 3U 1/6 and 1/8 rack sizes
