Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Electrical
> Used
> Plus Warranty
> Ridgid 535 1822 pipe threader 4-6" w/ 141 161, 811A die
Ridgid 535 1822 pipe threader 4-6" w/ 141 161, 811A die
YOUR LOOKING A USED 535 RIDGID THREADER, BUT IN "EXCELLANT" CONDITION! WITH AN 811a QUICK OPENING DIE HEAD, 1) 1/2"-3/4", 1) 1"-2" WITH THE THROUGH THE HEAD OILING SYSTEM.
I BELIEVE THE 535 IS A BETTER UNIT THAN THE 1822-I, IN SOME WAYS. WHY? THIS 535 IS ALL METAL, EXCEPT FOR THE FIBERGLASS COVER AND THE PLASTIC TOOL CABINET! THE 1822-I HAS A FIBERGLASS COVER AND A FIBERGLASS UNDERBELLY. THE 1822-I ALSO HAS A PLASTIC FRONT AND BACK COVER AND A PLASTIC TOOL OR DIE HEAD STORAGE TRAY.
THIS IS A VERY NICE UNIT! CHECK OUT THE PIC'S! WITH THE FOLLOWING MANUFACTURER'S DESCRIPTION......
* Large 1.75 gallon oil tray
* Generous top cover for keeping tools and fittings handy
* Speed chuck with rocker-action jaws centers and grips workpiece instantly
* Can be used with geared threaders Models 141 and 161
* Uses Models 816/817 semi-automatic, Model 815A self-opening or Model 811A quick-opening die heads
* Length gauge for quick, accurate cut-off
* Approved to UL Standards (NRTLC)
* Pipe Capacity: 1/8" - 2" (3 mm - 50 mm) 2 1/4" - 4" (62 mm - 100 mm), 4" - 6" (100 mm - 150 mm) with 141 and 161 Geared Threaders
* Bolt Capacity: 1/4" -2" (6 mm -50 mm)
* Motor: 1/2 HP, single-phase, 115V, 25-60 Hz, 15 Amp Reversible Universal motor.
* Switches: FOR/OFF/REV and Integral Safety Foot Switch
* Chuck: Speed Chuck with replaceable rocker-action jaw inserts (3)
* Rear Centering Device: Cam-action, turns with chuck
* Cutters: Self-centering, full-floating. Two models available: 1) Standard. No. 820 Wheel-Type Cutter, pipe capacity 1/8" - 2" (3mm-50mm), bolt capacity 1/4" - 1" (6mm-25mm). 2) Optional. No. 821 Blade-type cutter, pipe capacity 1/2" - 2" (12mm-50mm)
* Spindle Speed: 36 RPM standard (no load), 54 RPM model also available
* Reamer: 5-flute cone, RH, 1/8 "- 2" (3 mm - 50 mm)
* Oil Pump: Self-priming gerotor oil pump. RH/LH combination reamer available
NEED FINANCING?... TRY ERIC@ACCORDLEASE.COM EASY TO DEAL WITH, AND MOST OF THE TIME SAME DAY APPROVAL!
