Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Electrical
> New
> No Warranty
> Thomas compressor pump 215ADC38/12 12VDC
Thomas compressor pump 215ADC38/12 12VDC
w Motor voltage variations available to suit most automotive applications including 12v, 24v
w Motor Types Available: Permanent Magnet DC
w Free Air Flow: 125: Up to .57 CFM
w Maximum Intermittent Pressure: Up to 150 PSIG
w Bore Size: 125: 0.80 ; 115: 0.75 ; 215: 1.25 diameter
w One-piece connecting rod with TFE piston seal. Cylinder hard coated for wear resistance.
w Stroke Selection Available: 125: .560
w Restart Capability: Permanent magnet DC units will restart up to maximum load without internal valve modifications
w Sound Level: 58-60 dB(A) (Approximate from a 3-foot profile.)
w Air Suspension, Air Doors, Air Horns
Oil-less, non-lube piston and cylinder
Lightweight, die-cast aluminum components
Hard-coated aluminum cylinder for maximum piston wear life
Balanced for smooth, low vibration operation
Long-life, high performance PTFE compound piston ring
Inlet unloader or pressure restart
Permanently lubricated motor shaft and connecting rod bearings
Consult factory for custom applications
MODEL NUMBER 215ADC38/12 215ADC38/24
HEAD CONFIGURATION Pressure Only Pressure Only
STROKE .380 inches .380 inches
PRESSURE Flow @ 12v Flow @ 24v
MAX. INTERMITTENT PRESSURE 120 PSI 8.3 bar 120 PSI 8.3 bar
MAX. AMBIENT AIR TEMP. 158 F 70 C 158 F 70 C
MIN. AMBIENT START TEMP. -40 F -40 C -40 F -40 C
MOTOR VOLTAGE/FREQUENCY 12v DC 24v DC
MOTOR TYPE Permanent Magnet Permanent Magnet
CURRENT AT RATED LOAD (AMPS) 16.0 7.5
(LOCKED ROTOR, AMPS) 50.0 26.0
MIN. FULL LOAD SPEED (RPM) 3650 3400
NET WEIGHT 3 lbs. 1.4 Kg 3 lbs. 1.4 Kg
The information presented in this material is based on technical
data and test results of nominal units. It is believed
to be accurate and reliable and is offered as an aid to help
in the selection of Thomas products. It is the responsibility
of the user to determine the suitability of the product for
his intended use and the user assumes all risk and liability
whatsoever in connection therewith. Thomas Industries
does not warrant, guarantee or assume any obligation or
liability in connection with this information.
