Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Electrical
> Mt-100 mini diamon band saw
Mt-100 mini diamon band saw
- CNC Router Engraving Machine
- CNC Stepper Motor Drive Board
MT-100 Mini Diamon Band Saw with Two 37.7" loop diamond blades
The MT-100 Mini Diamond Band Saw is the first band saw engineered and designed to be a multiple use tool that cuts ceramic, glass and various materials.
* The MT-100 can cut dozens of materials, wet or dry.
* Two 37.7" (96 cm) long loop diamond blades included for sawing glass, ceramic, tile, stone, marble, porcelain, plastics, shells, plastics, fiberglass, printed circuit boards and more..
* The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade for wet sawing.
* The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life.
* The motor type is permanent magnet, high torque, with built in speed control. These are powerful DC motors that more consistently maintain torque as speed decreases.
* Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw.
* The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
* The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
* All frame and interior support walls are extra thick for maximum strength and durability.
* It's rigid and quiet. The molded plastic housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle.
* Two Years Full Confidence Warranty
* Extra 37.7" diamond blade is available as related product
* Construction: Injection molded, structural grade thermoplastic.
* Motor: permanent magnet, speed controlled, up to 2800 rpm.
* Size:18" high x 10" deep x 12" wide.
* Two loop diamond blades: 37.7" L x 1/8" W x 0.02" thick are included for immediately cutting.
* Throat Depth: 4.75" (12 cm)
* Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle.
* Minimum Radius: 3/16" (.5 cm)*
* Maximum Radius: 4.75" (12 cm)
* Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute)
* Input power: standard 115V AC and 230/240V are available upon request.
Please Note : We don't accept any Money
