Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Automative
> Refurbished
> Plus Warranty
> Graphic whizard model k sequential numbering machine
Graphic whizard model k sequential numbering machine
* Manufacturer: Graphic Whizard
* Condition: Very Nice. This is a complete system that works very well. We just ran it on our shop floor today and it feeds great and numbers very nicely.
* 1 Score Wheel Installed
* Heavy duty construction makes the K2 ready to run all day, every day. A 100-job memory provides a fast job change over. Microprocessor control give the operator the ability to position up to 100 numbers per head, anywhere on each sheet. Feature for feature, spec for spec, it is the best value in the industry.
* Adjustable strike area for a perfect hit.
* The Sequential Numberer imprints through 8-part carbonless forms.
* Set numbering head in any direction thru 360 degrees.
* The Sequential Numberer can be tilted forward or backward.
* Easy to remove or replace.
* Repeat Functions: 0, 1, 2, 3, and 4 (Head will print a number this many times before advancing)
* 8,000 standard-size sheets per hour
* 100 Job Memory to store numbering jobs
* Up to 100 numbers per head per sheet
* Crash Number Up to 10 Part Carbonless
* Feed Sets UNGLUED or Glued Side
* Create Snap Sets While Numbering
* Heads Rotate & lock throughout 360
* Perforating Options 2,4,6,8,12/Inch & Microperf
* Wide or narrow score blade available
* Speed: 8,000, 11 x 8.5"/A4 sheets per hour
* Number of Job Memories: 100
* Maximum number of numbering positions: 100 per head per sheet
* Maximum number of heads: 2
* Numbering Heads: 6 digit reverse standard (with 2 drop) 8 digit condensed optional "No" and letter prefix available
* Head Rotation: Lockable throughout 360 degrees
* Repeat Action: Consecutive, 1x, 2x, 3x, 4x
* Inking System: Ink pad with reservoir
* Perforating Blade Options: 2,4,6,8,12 TPI
* Scoring Blade Options: wide (standard) or narrow
* MICROPERF Blade Options: 42 or 72 TPI
* Minimum Stock Size: 3"W x 5"L (7.6cm x 12.7cm)
* Maximum Stock Size: 18" x 18" (45 cm x 45 cm)
* Stock Weight: 12# - 12 point (45 - 250 gsm)
* Impression Control: Electronically variable, crash up to 10-part carbonless
* Drive Unit Type: Electronic
* Register: Microprocessor controlled to .010" (0.25mm)
