Kenosha Reuse Discussion Board > GURNEE, IL
> Commercial
> Automative
> New
> Circle seal controls SV20B2NC4T43 2-way solenoid valve
Circle seal controls SV20B2NC4T43 2-way solenoid valve
Circle Seal Controls Inc. SV20B2NC4T43 2-Way Solenoid Valve for Gas and Liquid
* Model Number: SV20B2NC4T43
* Serial Number: !!Quantity Available!!
* Electrical Requirements: 28 Volts DC
* Pressure Rating: 6,000 PSI
* Versatile: 3-way 2-position, 2-way normally closed, or 2-way normally open
* 303 stainless steel, brass or aluminum construction
* Explosion-proof per MIL-STD-810B
* 2NC 2-Way, Normally Closed
* 4 Seal Material Buna N (standard)
* 3 Seat Material Nylatron (standard)
* Balanced Poppet Design The SV Series Solenoid Valves utilize a design that employs a single poppet, two pressurized sliding seals, and two main valve seats. The diameter of these seals and the two seats which the poppet seals against, have the same diameter. The pressure forces are always balanced regardless of poppet position. The only new force acting on the poppet is the poppet return spring or the forces exerted on the armature by the magnet coil.
* The De-energized Position With the valve in a de-energized position and pressure applied to Port B, the valve operates as a 3-way, 2-position, normally closed valve. In this position a flow pattern from Port A to Port C is established. Pressure can be applied to either port. The forces affecting the poppet are on the normally closed seat resulting from the poppet return spring.
* Energized Position With pressure applied to Port B and electrical energy applied to the coil, the armature is drawn up against the coil compressing the armature return spring, and pulling the poppet up tight against the normally open seat of the valve, in this condition, a flow pattern between Port B and Port C is established and Port A is isolated. When the valve is de-energized, the poppet return spring forces the poppet to return to the normally closed seat and reestab lishes a flow pattern between Port C and Port A with Port B being closed.
* 3-Way, 2-Position, Normally Open In this configuration pressure is applied to Port A rather than to Port B with the valve de-energized. Pressure is connected to Port C. When the valve is energized Port A is closed and Port C is connected to Port B.
* 2-Way, 2-Position Valves (Normally Closed or Normally Open) Any of the three ported valves may be converted to a two-way operation by plugging Port A or B. Plugging Port A provides a 2-way, 2-position, normally closed valve. Plugging Port B provides a 2-way, normally open valve. Circle Seal Controls can also provide this valve as a 2-way, normally open or normally closed valve with only 2 ports as a standard item.
* Selector Valve The 3-way, 2-position valves can also be used as selector valves by connecting two separate pressure sources to Ports A and B and then selectively running them to Port C depending on whether the valve is energized or de-energized. A single fluid source connected to Port C may also be diverted to Ports A or B selectively.
* Body Construction Materials: 303 stainless steel, brass or aluminum
* Seat materials: Nylatron , polyimide (Vespel ), or PCTFE
* Pressure Ratings: SV10, SV30 & SV430: vacuum to 3000 psig (0 to 207 bar), SV20 & SV460: vacuum to 6000 psig (0 to 414 bar)
* Temperature Range: 65 Fahrenheit to +165 Fahrenheit ( 54 Celsius to +74 Celsius)
* Port Size and Connections: , , NPT or AND10050
* Flow Capacity: SV10 & SV20: Cv=0.096 SV430: Cv=0.80; SV30: Cv=0.46 SV460: Cv=0.64
