Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Mechanical
> Scotchman 65 ton ironworker model 6509 with dies
Scotchman 65 ton ironworker model 6509 with dies
IT IS IN GOOD CONDITION WITH ADJUSTABLE STROKE CONTROL & ELECTRIC REMOTE FOOT PEDAL CONTROL
THIS IS A GOOD WORKING MACHINE AND IS READY TO GO TO WORK IN YOUR SHOP
PUNCH STATION CAP. 65 TON @ 1 1/16" IN 3/4" MATERIAL
ANGLE SHEAR CAP. 6"X 6" X 3/8" & 5"X 5" X 1/2" @ 90 DEGREES
FLAT BAR CAP. 1" X 6" & 1/4" X 24" WITH A 24" 4 WAY REVERSEABLE BLADE
THERE ARE LOTS OF PUNCHES & DIES WITH THIS MACHINE FROM 1/4" TO 1 1/4 " AND SOME OVALS TOO (NOT ALL PUNCH & DIE SETS ARE COMPLETE SEE PICTURES)
SCOTCHMAN MODEL #6509, 5 H.P. , DUAL VOLTAGE 220 OR 440, 3 PHASE WITH A 2500 PSI HYD SYSTEM
ITEM CAN BE PICKED UP, I HAVE A FORKLIFT TO LOAD WITH, APROX WEIGHT IS 2700 LBS
