Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Mechanical
> Refurbished
> Plus Warranty
> Bunn ultra cds hopper lid light bulbs lamps
Bunn ultra cds hopper lid light bulbs lamps
These are the light bulbs that illuminate the hopper lids on both the CDS and Ultra machines, and you receive four bulbs with each purchase. Each lid has two bulbs (one front and one back). To remove a bad bulb, unplug the lid, remove the two screws on the top of the lid and separate the two halves. The signs may fall out, that's OK but be careful not to tear, crease, or lose the signs. You may wish to use gloves or a towel to protect your fingers as you grasp the bulb and pull straight out. If the buls is damaged, definitely use eye and hand protection to prevent injury from broken glass.
To install the new bulb, reverse the process and line up the new bulb with the socket and push straight in. Ensure the signs are properly installed in the top half of the lid (they align only one way and are held in with little tabs in the plastic lid), make sure the wire is lined up with the slot in the back of the top half of the lid, align the top and bottom halves and re-install the two screws.
