Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Mechanical
> Refurbished
> No Warranty
> Coleman powermate 9.3KW standby generator
Coleman powermate 9.3KW standby generator
(Automatic transfer switch is being sold seperately in case you already have one)
0.2 HOURS!! Now that's a FRESH HONDA MOTOR!!
This is not a lemon, this thing's really in cherry condition -
the homeowner had no idea it hadn't exercised since it was installed
because his transfer switch blew apparently right after the install,
and he hasn't had a power outage until just over a week ago
when he discovered the generator didn't come on.
So he called us and said "I want a new generator, mine doesn't work
and my old installer won't answer my calls." NO PROBLEM!!
We checked it over and it is in *wonderful* condition.
Match it with an Asco or Zenith or Cutler Hammer ATS,
and you've got a great genset that
I'll bet was probably in upwards of $3,500 brand new
Look at the pictures and watch the video -
This thing is in the best shape of any used generator
however there was two rust spots on top,
which we sanded and touched them up
also inside the enclosure in the back, there's some rust
but not anything that I would be concerned with
Enclosure completely dissasembles with an 8mm socket in under 20 minutes
You gain full access to everything - I'm very impressed with this little guy.
There's an 8 LED System Status Display
Because it is not brand new out of box,
MAIN LINE CIRCUIT BREAKER IS 45 Amp 240 Volt (60 Hertz)
Honda GX 620 Industrial 4 Cycle 90 Degree V-Twin Engine
3600 RPM, includes factory installed oil cooler
Automatic Remote Start (2 Wire)
Sound Data: Less than 68dB's @ 23 feet @ Full Load
** 120V BATTERY TRICKLE CHARGER IS INCLUDED **
(requires 120V circuit ran from the house to it)
***Strongly recommend professional installation by an experienced generator installer***
If you are planning on having a carrier pick it up, I will need a Bill of Lading sent to give to the driver.
Dimensions: 43"L x 33"W (that includes the precast pad it's mounted to) x 27"H
NMFC# 62120 (freight company needs this for the freight class)
We have a forklift and can load onto any truck or semi trailer
