Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Mechanical
> Refurbished
> Auto darkening welding helmet mask arc tig mig welder
Auto darkening welding helmet mask arc tig mig welder
AUTO DARKENING WELDING HELMET MASK Arc TIG MIG Welder
This Welding Helmet is ideal for all kinds of Welding processes like Arc, TIG, MIG, Brazing or Plasma Cutting. It has all of the features you would expect in a professional welding helmet to provide superior protection.
Absorbing Filter Lens that protects the user against Ultraviolet (UV) and Infrared (IR) Radiation. Conforms with safety standards: EN379 and ANSI Z87.1-2003 Standard
Lens automatically darkens when an arc is stuck in 1/10,000 of a second. When welding arc stops the lens returns to the light state allowing you to see your project without having to lift your helmet up and down after each weld!
Darkness sensitivity control knob on the inside from DIN9-13#, plus a time delay switch to control switching time from darkness to light depending on your welding process
At just over 1 lb., this Light Weight Composite Body Helmet will provide reduced body fatigue during use. Has a two-way adjustable padded headband that will ensure a comfortable fit
Solar cell powered when welding, with battery backup. Helmet automatically turns off after 15 minutes of inactivity.
Includes Operating Manual and Shade Guide Table. Has a One Year Warranty
Shade Number In Light State: DIN4#
Shade Number In Dark State: DIN9-13# (stepless regulation)
Response Time: < 0.1ms (room temperature)
Return Time: Rapid-0.5s, Slow-1.5s
Power Supply: Two AAA alkaline batteries with solar assist (min. lifetime is 3000 welding hrs)
Working Temperature: -23 (5 ) to +131 (55 )
Lens Size: 3-1/2" x 1-1/2" (90 x 40mm)
Dimension: 4-3/4" x 3-3/4" x 1/2" (120 95 12mm)
UV Transmittance: 313nm 0.00006%
UV Transmittance: 365nm 0.00006%
IR Transmittance: 780-1300nm 0.003%
IR Transmittance: 1300-2000nm 0.009%
