Kenosha Reuse Discussion Board   >   CALEDONIA, WI   >   Commercial   >   Mechanical   >   New   >   No Warranty   >   New ridgid 1822-i pipe threader 815A die 4-6" w 141 161

New ridgid 1822-i pipe threader 815A die 4-6" w 141 161


YOUR LOOKING A USED BUT NEWER 1822-I RIDGID THREADER, IN "VERY NICE CONDITION"! IT COMES WITH A 815A SELF OPENING, SELF OILING DIE HEAD LOADED WITH DIES 1/2"-3/4"AND A NEW SET OF 1"-2", WITH THE THROUGH THE HEAD OILING SYSTEM (this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil and when the threading is done, the die head automatically opens, so you can back off the carriage without having to reverse the threader or open the die head manually! This saves a full step and probably cuts the time to thread a pipe by 25%!). THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH. THIS UNIT INCLUDES A RIDGID COLLAPSABLE ROLLING WHEEL STAND! ALL DIE TEETH ARE PERFECT, NO CHIPS AND ONE SET IS NEW! There is a fracture on the plastic around the oil/chip strainer. Cosmetic only and doesn't affect the return of oil to the reservoir, but wanted to make sure it was mentioned.



New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6 New ridgid 1822-i pipe threader 815A die 4-6