Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Industrial
> 20X dip switches 4-position 11.33 * 6.46 mm 0.1" pitch
20X dip switches 4-position 11.33 * 6.46 mm 0.1" pitch
20x DIP Switches 4-Position 11.33 * 6.46 mm 0.1" pitch
20 brand new 4-Position DIP switches. Their size is 11.33 * 6.46 mm 0.1" pitch.
These switches are high quality, but competitively priced.
See specifications and pictures!
* Operation Force :800g Max
* Operation Temp : -20c~+70c
* Storage Temp : -40c to 85c
* Electrical Life : 2000 operations cycles per switch 24 VDC,25mA
* Non-Switching Rating : 100mA, 50VDC
* Switching rating : 25mA, 24VDC
* Contact resistance : (a) 50 mO max. at initial
* (b)100mOmax. after life test
* Insulation Resistance : 100MO, 500VDC
* Dielectric Strength : 500VAC/1 minute
* Circuit : Single pole single throw
* Keep all switch contacts in their OFF position for all operations
* Reflow Soldering (reference only):reflow zone 230c for 30 seconds
* Hand Soldering : Use a soldering iron of 30 watts, controlled at 320c,approximately 2 seconds while applying solder.
* Cleaning: Flux clean using force rinse, high agitation, or triple bath. Freon TF or TE work well. (When using vapor methods, do not expose switches to solvents above 125 F (51c)).
* Base Engineering plastics: Black
* Cover Engineering plastics: Blue
* Button Engineering plastics: White
* Terminal: Alloy Copper,Gold plating
