Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Automative
> Refurbished
> Plus Warranty
> New 5" milling machine lockdown vise swivel hardened
New 5" milling machine lockdown vise swivel hardened
5" ANGLE LOCK MILLING VISE NEW
THE GRADUATION AND SIZE ARE THE SAME AS USA BRANDS AND ONLY 1/2 THE PRICE!!
* Accurate to .002" on parallelism and Squareness
* Tilt lock mechanism creates downward pressure on jaw ensuring both jaws are parallel during clamping; eliminating jaw tilt
* Needled bearing of thrust collar cuts friction and increases clamping pressure
* Vise bed is cast from 80, 000 lbs of ductile iron
* Sliding surface of the vise bed is flame hardened and ground
When A and C are unequal to E, you can swivel the vise base to suitable angle, then the vise can be installed onto the Mill.
SHARS 6" SPV615 Milling Vise +/-0.0004 $375
* 6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw opening
* Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
* Bed height Tolerance 3.189" +/-0.0005"
* To learn more, click here to 202-0995
SHARS 6" SDV620 Double Station Milling Vise +/-0.0002 $720
* 4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)
* Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
* Jaw lift prevention mechanism by eccentric pin design
* Bed height Tolerance 3.25" +/-0.0005" (matched bed height at no additional cost)
* Clamping repeatability +/-0.0002"
* To learn more, click here to 202-0999
