Kenosha Reuse Discussion Board > CALEDONIA, WI
> Commercial
> Automative
> Jet shaper 1 hp 1/2"-3/4" interchangable spindle
Jet shaper 1 hp 1/2"-3/4" interchangable spindle
Here is a Jet Shaper, model number 708319. When it comes to Jet you know your getting a good product. The shaper is worth about $1100, I would like to move this right away so I'm dropping this to $800. If you have any offers then please fell free to make them and I will give them consideration. Due to Freight I am afraid that I am constrained to PA,DE,VA,MD,NJ.
JET 708319 JWS-18HO 1/2-Inch and 3/4-Inch Interchangeable Spindle 1-Horsepower Shaper with 1/4-Inch and 1/2-Inch Router Collets, 115/230-Volt 1-Phase
1 hp motor delivers plenty of power for even the toughest shaping jobs. Heavy, rigid cast-iron table creates a large working surface. Open style stand provides stable work station. Left and right fences are independent and feature micro adjustments. Standard equipment includes 1/2-inch and 3/4-inch interchangeable spindles, 1/2-inch and 1/4-inch router bit collets.
* Heavy, rigid cast iron table creates a large working surface
* Open-style stand provides stable work station
* Safe, accurate spindle height adjustments are possible with a hand wheel and spindle lock
* Powerful, reversing, single phase motor has industrial controls
* Two reversible spindle speeds are provided
* Left and right fences are independent and feature micro-adjustments
* Adjustable work piece hold-downs are mounted to the fence
* 1/2" and 3/4" interchangeable spindles
* 1/2" and 1/4" router bit collets
Spindle Speeds (RPM): 7,000, 9,000
Table Size (WxD/in): 18-1/4 x 16
Table Opening Diameter (in): 5-1/4
Insert Opening Diameter (2/in): 1-5/8 & 3-1/4
Fence Size (2/in): 49-3/4 x 3-1/4
Under Nut (in): (1/2) 2-3/16 (3/4) 2-3/16
Router Bit Collet Size (in): 1/4 & 1/2
Overall Dimensions (WxDxH/in): 18-1/2 x 22-3/8 x 40
Motor (TEFC): 1 HP, 1 Ph 115/230V Prewired 115V
