Kenosha Reuse Discussion Board > WAUKEEGAN, IL
> Commercial
> Electrical
> Eldex universal fraction collector u-1A w/o tray
Eldex universal fraction collector u-1A w/o tray
Eldex Universal fraction collector U-1A w/o tray
This fraction collector is missing the tray with the spiral track of test tube holders. On the front is a three-digit control (000-999) with a switch beside it for setting it to read either drops or minutes. There's a three-digit LED display, a "reset/adv." button, a power switch, two fuse holders, and a set of three power outlets labelled "power", "run" and "finish". On the back is a 1/8" phono connector labelled "recorder" (connector is included), a 4-pin connector for the drop counter, and an auto-stop adjustment screw. The unit takes 115V power.
When plugged in and turned on the drive wheel starts rotating, but since there isn't a tray the unit doesn't actually advance. The various sensors respond when manually manipulated. Aside from the missing tray this appears to be a good working unit.
One Eldex Universal fraction collector U-1A without a tray
