Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Mechanical
> New
> Plus Warranty
> New hirschmann RS2-16 ethernet rail switch
New hirschmann RS2-16 ethernet rail switch
NEW HIRSCHMANN RS2-16 Ethernet Rail Switch
HIRSCHMANN RS2-16 ETHERNET RAIL SWITCH in Excellent Condition
Unmanaged Industrial ETHERNET Rail Switch, store and forward switching mode, Ethernet (10 Mbit/s) and Fast-Ethernet (100 Mbit/s)
16 x 10/100Base-TX, TP cable, RJ45 sockets, auto-crossing, auto-negotiation, auto-polarity
Power supply/signaling contact
1 plug-in terminal block, 6-pin
Network size - length of cable
Current consumption at 24 V DC
LEDs (power, link status, data, error), signal contact / fault relais (24 V DC / 1 A)
Relative humidity (non-condensing)
34.5 years; MIL-HDBK 217F: Gb 25 C
15 g, 11 ms duration, 18 shocks
1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13.2 Hz - 100 Hz, 90 min.;3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.
EN 61000-4-2 electrostatic discharge (ESD)
6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field
EN 61000-4-4 fast transients (burst)
2 kV power line, 1 kV data line
power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity
3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz)
Safety of industrial control equipment
cUL 1604 Class 1 Div 2 (E203960)
Germanischer Lloyd (15 662 - 00 HH)
Scope of delivery and accessories
device, terminal block, operating manual
Accessories to order separately
rail power supply RPS 30, RPS 60 or RPS 120, 19" installation frame