Kenosha Reuse Discussion Board > SOMERS, WI
> Commercial
> Electrical
> Thorlabs S1FC1550 fiber coupled laser source 1550NM
Thorlabs S1FC1550 fiber coupled laser source 1550NM
Thorlabs S1FC1550 Fiber Coupled Laser Source 1550nm
ThorLabs S1FC1550 Fiber Coupled Laser Source
The ThorLabs S1FC1550 is a flexible bench top Fiber Coupled Laser Source that provides easy coupling and simple control of laser diode driven fiber optics. The S1FC Series come with a pigtailed Fabry-Perot Laser diode with single mode fiber behind an FC/PC bulkhead connector. The fiber pigtailed lasers utilize an angled fiber ferrule at the internal laser/fiber launch point to minimize reflections back into the laser diode, thereby increasing the overall stability.
15 min: 0.05 dB, 24 hr: 0.1 dB
* (After 1 hr Warm-up at 25 10 C
* Setpoint Resolution 0.01 mW
* Adjustment Range ~0 mW to Full Power
* Operating Temperature 15 to 35 C
* Storage Temperature 0 to 50 C
* AC Input 115 VAC / 230 VAC (Switch
* Modulation Input 0 - 5 V = 0 - Full Power, DC or Sine
* Modulation Bandwidth 5 kHz Full Depth of Modulation
* 30 kHz Small Signal Modulation
I think the photos demonstrate that this laser source is in excellent cosmetic condition. There is no damage, old inventory stickers, adhesive residue, or names carved into the case. Further, I have verified that the laser is working and the output matches the front panel meter. This is a very clean unit that includes a printed manual and power cord. It is ready to be put to use.
