Kenosha Reuse Discussion Board > SALEM, WI
> Commercial
> Infiltec blower door kit - barely used
Infiltec blower door kit - barely used
Here we have a Infiltec blower door kit. It comes as seen with everything needed to perform a blower door test. I have only used this unit less than a dozen times and have taken very good care of it. I'm selling it because the company that I work for uses a Minneapolis and the software is not compatible. This kit retailed for $2995. The manometer still has the plastic cover for the screen still on it!! It was calibrated March of 2010 and I will provide the calibration receipt with the kit. This kit is in new condition and has nothing wrong with it. If you have any ?'s....Please feel free to ask em'. Thanks for looking!
Infiltec E3 Blower Door High Pressure Fan Performance Curves
USE OF THIS DATA: Some blower doors are used for tests that require pressures that are higher than the nominal 50 Pa room/building test pressure that is used for standard building air leakage tests. The following data will show if the E3 fan has enough power to perform higher pressure tests. Note that the standard E3 Dwyer Magnahelic building pressure gauge is limited to 0.25 " wc (62.5 Pa), and higher pressure testing will require a higher pressure gauge. The Infiltec digital gauges do not have this problem. Please contact the Infiltec factory for optional Dwyer Magnahelic gauge selections (540/943-2776).
EQUIPMENT: E3 Fan with standard blade A.
DATE & LOCATION: August 1997 - Infiltec factory calibration test chamber.
NOTE: Preliminary data - not corrected for ~1500 ft altitude.
E3 Blower Door Fan Performance at High Pressure - Blade A - Metric
E3 Blower Door Fan Performance at High Pressure - Blade A - US Units
