Kenosha Reuse Discussion Board > RACINE, WI
> Commercial
> Mechanical
> Realistic hyperscan 400 ch. pro-2006 scanning receiver
Realistic hyperscan 400 ch. pro-2006 scanning receiver
This is a used but in great condition. NO RESERVE!
Following on from the PRO-2004 and PRO-2005 receivers the PRO-2006, manufactured by GRE in Japan is perhaps the most popular base/mobile scanning receiver in recent years. It is also available as the Commtel 205.
Frequency coverage is continuos from 25-520MHz and 760-1300MHz, any mode of AM, NFM or WFM can be selected on any frequency and a choice of increment/channel steps can also be selected.
400 memory channels store frequency and mode whilst the 10 search banks allow user defined lower and upper frequency limits to be stored together with mode and increment step. An additional 10 "monitor" channels are available to store frequencies that may be found during search.
Two speeds of scan/search are available, the faster of the two allowing around 26 channels per second to be scanned.
Internally the receiver requires a PP3 (9 volt) battery to mainatin the memory contents when the receiver is not connected to a power source. The receiver is fitted with an internal AC transformer (240 volts AC) or can be run externally via 12 volts DC.
* Frequency Coverage: 25-520MHz and 760-1300MHz
* Increment steps: 5KHz, 12.5KHz and 50KHz
* Memory Channels 400 (10 banks of 40)
* Monitor Channels: 10 (for storing frequencies found when searching)
* Sensitivity (from the manual)
AM (20dB S/N with 60% modulation): 25-1000MHz 2uV, 1000-1300MHz 5uV
NFM (20dB at 3KHz deviation): 25-1000MHz 0.5uV, 1000-1300MHz 3uV
WFM (30dB S/N at 22.5KHz deviation): 25-1000MHz 3uV, 1000-1300MHz 10uV
* Selectivity (from the manual)
AM/NFM: +/- 9KHz = -6dB, +/- 15KHz = -50dB
WFM: +/- 150KHz = -6dB, +/- 300KHz = -50dB
* Scanning Speed: Slow = 13 channels per second, Fast (Hyperscan) = 26 channels per seconds
* Size:76mm (h) x 220mm (w) x 205mm (d)
