Kenosha Reuse Discussion Board > RACINE, WI
> 100W 5V dc 20A regulated switching power supply [K013]
100W 5V dc 20A regulated switching power supply [K013]
100W 5V DC 20A Regulated Switching Power Supply [K013]
K013-HS-100W-5V-20A.jpg picture by hpstore2008
* AC input range selectable by switch.
* Protections: Short circuit /Overload / Over voltage.
* High efficiency and low operation temperature.
* Soft-start current can reduce the AC inpur impact effecticly.
* PWM control and regulated.
* 100% full-load burn-in test.
* Installed with EMI filter, minimum wave.
* Fixed switching frequency at 25KHz.
* Low price and high reliability.
RIPPLE & NOISE(max.) Note.2
200ms, 80ms, 20ms at full load
85 132VAC/180 264VAC by switch 255 370VDC
COLD START 30A/115VAC 60A/230VAC
105 150% rated output power (150 200% rated output power for S-100-7.5 only)
Protection type: Shut down 0/p voltage, re-power on to recover
-10 +60 (Refer to outputload derating curve)
10 500Hz, 2G 10min./1cycle, 60min. Each alongX,Y,Z axes
1/p-0/p:1.5KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC
1/p-0/P, 1/P-FG,0/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION
Design refer to FCC part15 J Conduction ClassB
322.4K hrs min. MIL-HDBK-217F(25 )
0.62Kg; 20pcs/13.6Kg/0.72CUFT
1.All paramenters NOT specially mentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3.Tolerance:includes set up tolerance, line regulation and load regulation.
s100-1.jpg S-100 1 picture by hpstore2008s100-2.jpg S-100 2 picture by hpstore2008
![100W 5V dc 20A regulated switching power supply [K013]](/RACINE,-WI/100W-5V-dc-20A-regulated-switching-power-supply-K013-picture.jpg)