Kenosha Reuse Discussion Board   >   SOMERS, WI   >   V-block offset multi-vee usa moore machinist toolmaker

V-block offset multi-vee usa moore machinist toolmaker


V-BLOCK MULTI-VEE OFFSET STYLE WITH 1 CLAMP BLACK-OXIDED AS SHOWN!! USED ON A MOORE JIG-GRINDER BY A 40+ YEAR TOOLMAKER! WOW WHAT A SWEET TOOL! USA AMERICAN TOOLMAKER MADE TOOLS FOR SURE! NONE BETTER UNLESS YOU CHECK MY STORE FOR MORE!!!! V-BLOCK MEASURES 3.475" WIDE X 3.475" TALL AND IS 6.150" LONG. VEES ARE 2-5/8" OR 2.6" WIDE MEASURED WITH SCALE. EACH END OF V-BLOCK ON SIDE OF VEE HAS (6 OR 12) TAPPED 1/4" X 20 HOLES FOR CLAMP OR AS NEEDED. THERE ARE ALSO ( 3, 12 TOTAL) TAPPED HOLES 1/4" X 20 ON EACH SIDE OF VEE FOR STOPS OR AS NEEDED. IN THE CENTER OF BASE THERE ARE (5) DRILLED AND REAMED 1/2" HOLES TO BOLT TO AN ANGLE PLATE OR DOWN AS NEEDED!! SUPER HANDY TOOL MADE BY USA AMERICAN TOOLMAKERS! SIMPLY THE BEST!!!! LOTS OF SUPER-SIZE PICTURES AND MORE IF NEEDED JUST ASK!



V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker V-block offset multi-vee usa moore machinist toolmaker